specifications
Here you can find technical specifications and background information of our products:
Weight limits
Dimensions
Fixing materials
Isolation sets
Maintenance
Guarantee
Material specifications
Preparation for coating
Coating
HT-cover material
Weight limits
| Shower stool |
|
| Static seat ressure |
maximum 150 kg |
| |
|
|
Shower chairs and shower
and toilet chairs |
|
| Static seat pressure |
maximum 300 kg |
|
Constant push pressure per
arm rest |
maximum 75 kg |
| |
|
|
Tilting shower chair and
height adjustable shower
chair |
|
| Static seat pressure |
maximum 150 kg |
|
Constant push pressure per
arm rest |
maximum 75 kg |
| |
|
| Shower seats |
|
| Static seat pressure |
maximum 150 kg |
| Static seat pressure when a floor support set is mounted to plastic shower seat |
maximum 300 kg |
|
Constant push pressure per
arm rest |
maximum 75 kg |
| |
|
|
Shower stretchers and
shower trolleys |
|
| Static load |
maximum 150 kg |
| |
|
|
Fixed and hinged arm
supports |
|
| Vertical static pressure |
maximum 150 kg |
| |
|
| Grab rails Ergogrip |
|
| Static pressure |
maximum 150 kg |
| |
|
| Swinging support |
|
| Static pressure |
maximum 150 kg |
| |
|
| Bath seat |
|
| Static seat pressure |
150 kg |
DimensionsAll dimensions are in mm. Tolerances for all indicated dimensions are ± 5 mm. We reserve the right to modify designs as part of our ongoing product development.
Fixing materials
With the exception of some bathroom accessories, all products for wall mounting and floor mounting are being delivered without fixing materials. The choice of fixing materials depends on the material of the wall or of the floor. For a durable, reliable mounting, use only corrosion resistant fixing materials.
Isolation setsBecause of the necessary electrical isolation, products for wall mounting or floor mounting, which are not designed with plastic flanges or wall plates, will be delivered with an isolation set including heavy duty washers and caps.
Maintenance
For all products: clean with non-aggressive cleaners only. Rinse with clean water after use.
GuaranteeTwo years manufacturers' warranty on all products.
All Linido bath & safety products have the CE-mark medical equipment.
Material specifications
| Steel ST37.2 |
DIN 17100 |
Ø 28,6 x 1,5 mm |
| Steel ST37.2 |
DIN 17100 |
Ø 25,4 x 1,5 mm |
| Stainless steel |
AISI 304 |
Ø 28,0 x 1,5 mm |
| Stainless steel |
AISI 304 |
Ø 25,4 x 1,5 mm |
| Stainless steel |
AISI 316 |
Ø 25,0 x 1,5 mm |
| Wall flanges Ergogrip and wall plate hinged arm support |
Glass fibre reinforced nylon
|
| Plastic bathroom accessories |
Nylon PMMA
|
| Wall plates of shower seats |
Stainless steel AISI 304 |
Moving and/or hinged parts are always made of stainless steel and/or plastic.
Preparation for coating
Before coating, steel is alkaline de-greased, phosphated and passified.
Coating
Epoxy, 80-100 µm thick.
Weather-resistant and impact-resistant (Buchholz hardness test to DIN 53153 > 80). Meets salt spray test to DIN 50021/ASTM B117 (1000 hours, < 1 mm).
HT-cover material
Woven nylon cloth with plastic coating fully glued around the tube. Does not wear out and is easy to clean.
